6000Mbps fast upgrade
6000M is the wireless rate specification level of the router, including 2.4G frequency band rate of 574Mbps, 5G frequency band rate of 4804Mbps, and AIoT antenna rate of 583Mbps.
4K QAM high-speed transmission
More advanced transmission technology, speed up by 20% 4K QAM technology can further compress data density and increase the amount of data transmitted at the same time by 20%. With a device that supports 4K QAM, the WiFi speed can be accelerated by another level.
160MHz high bandwidth
Doubled the bandwidth and doubled the speed
The bandwidth is like a highway. Congestion is inevitable when the conventional 4-lane lane encounters high traffic. The AX6000 doubles all lanes and doubles the speed directly. Even if multiple devices are connected, you can enjoy the ultimate experience of smooth traffic.
2500Mb full speed network port
New cross-generation network port to meet the network speed demand in the next 5 years
When the home bandwidth exceeds Gigabit, the Gigabit Ethernet port of the traditional router will become a bottleneck, and the 2500M Ethernet port can easily meet the needs of future broadband upgrades. At the same time, it supports WAN/LAN switching. When used as a LAN port, it can be used with NAS (Network Attached Storage) to form a high-speed family private cloud disk.
MU-MIMO + OFDMA
Simultaneous transmission of multiple devices, no interference between playing games and watching movies The combination of MU-MIMO and OFDMA enables up to 16 devices to be sent in one transmission. Makes multiple devices faster and lower latency when used at the same time.
6 independent high-performance signal amplifiers
Every room also has a good signal The independent signal amplifier can effectively enhance the signal transmission power and improve the signal receiving sensitivity. Make the signal of the router pass through the wall better, and cover a wider area. A single router can easily cover a large three-bedroom apartment
Xiaomi Mesh Networking
The multi-story apartment is not afraid, the whole house WiFi signal has no dead angle coverage Mesh technology enables multiple AX6000s to form a Mesh network, which can cover the entire house with super strong signals, whether it is a large apartment or multiple floors. The device can automatically roam between multiple routers seamlessly, and play without lag while walking.
248 devices online at the same time
Stable connection at all times There are more and more connected devices at home, such as mobile phones, tablets, laptops, TVs, game consoles… and smart devices throughout the house. 512MB large memory is specially prepared for multi-device networking, stable connection and response at any time.
Specifications:
Processor: Qualcomm IPQ5018
RAM: 512MB
2.4G Wi-Fi: 2×2 (supports up to IEEE 802.11ax protocol, the theoretical maximum rate can reach 574Mbps)
5G Wi-Fi: 4×4 (supports up to IEEE 802.11ax protocol, the theoretical maximum rate can reach 4804Mbps)
Antenna: 6 external high gain antenna + 1 external AIoT antenna
Machine interface: 1 10/100/1000/2500M adaptive WAN/LAN port (Auto MDI/MDIX)
1 10/100/1000M adaptive WAN/LAN port (Auto MDI/MDIX)
2 10/100/1000M adaptive LAN ports (Auto MDI/MDIX)
LED indicators: 7 (SYSTEM indicator x 1, INTERNET indicator x 1, network port indicator x 4, AIoT status indicator x 1)
Dual frequency: 2.4GHz and 5GHz
Power supply: 12V/2A
Dimensions (Length x Width x Height): 408mm x 133mm x 177mm